| Real Interwoven Solid Brass and Stainless Steel Grilles
(These are not stamped woven effect grilles but hand woven. For Woven Effect please Click Here)
High quality grilles, hand woven, made to order.
|
Product Info.
Priced and made to your required grille dimensions.
Various combinations of aperture size, material and wire mesh can be chosen. |
Also available in: Antique Brass, Antique Copper or with Bronze, Nickel or Chrome plating finishes (at additional expense).
|
| Examples of Interwoven Grilles (More examples at
bottom of page.) |
|
Diamond Natural Brass Example
|
|
(Image picture against red background.
Click to enlarge)
|
Full Description:
Interwoven Diamond Natural Brass Grille, 3mm Wide Reeded Brass Wire, 10mm Diamond,
Fine Wire Mesh Backing.
Product Ref: GIWD/3R/10A/FM
Notes:
- Made by hand to required size.
- Cannot be cut by customer.
 |
Dispatch Timescale:
Currently approx. 4 to 6 weeks. |
|
More Info:
-
General helpful information can be found by Clicking Here (or scroll down)
-
Alternative designs Specifying Table can be found by Clicking Here (or scroll down)
-
Pricing and Ordering is available by use of our Online Quotation Calculator where you can experiment with options and create a beautiful handmade decorative grille to suit your style and budget with the option to purchase online.
-
Construction, Fitting and Technical can be found by scrolling down or Clicking Here
|
|
|
|
|
Diamond Stainless Steel Example
|
|
(Image picture against red background.
Click to enlarge)
|
Full Description:
Interwoven Diamond Stainless Steel Grille, 5mm Wide Reeded Stainless Steel Wire, 25mm Diamond, Large Mesh Backing.
Product Ref:
GIWD-SS/5R/25A/LM-SS
Notes:
- Made by hand to required size.
- Cannot be cut by customer.
|
Dispatch Timescale:
Currently approx. 4 to 6 weeks. |
|
More Info:
-
General helpful information can be found by Clicking Here (or scroll down)
-
Alternative designs Specifying Table can be found by Clicking Here (or scroll down)
-
Pricing and Ordering is available by use of our Online Quotation Calculator where you can experiment with options and create a beautiful handmade decorative grille to suit your style and budget with the option to purchase online.
-
Construction, Fitting and Technical can be found by scrolling down or Clicking Here
|
|
|
|
|
Diamond Stainless Steel Example
|
|
(Image picture against red background.
Click to enlarge)
|
Full Description:
Interwoven Diamond Stainless Steel Grille, 5mm Wide Reeded Stainless Steel Wire, 10mm Diamond, No Mesh Backing.
Product Ref:
GIWD-SS/5R/10A/NM
Notes:
- Made by hand to required size.
- Cannot be cut by customer.
|
Dispatch Timescale:
Currently approx. 4 to 6 weeks. |
|
More Info:
-
General helpful information can be found by Clicking Here (or scroll down)
-
Alternative designs Specifying Table can be found by Clicking Here (or scroll down)
-
Pricing and Ordering is available by use of our Online Quotation Calculator where you can experiment with options and create a beautiful handmade decorative grille to suit your style and budget with the option to purchase online.
-
Construction, Fitting and Technical can be found by scrolling down or Clicking Here
|
|
|
|
|
Square Stainless Steel Example
|
|
(Image picture against red background.
Click to enlarge)
|
Full Description:
Interwoven Square Stainless Steel Grille, 5mm Wide Plain Stainless Steel Wire, 25mm Square, Fine Mesh Backing.
Product Ref:
GIWS-SS/5P/25A/FM-SS
Notes:
- Made by hand to required size.
- Cannot be cut by customer.
|
Dispatch Timescale:
Currently approx. 4 to 6 weeks. |
|
More Info:
-
General helpful information can be found by Clicking Here (or scroll down)
-
Alternative designs Specifying Table can be found by Clicking Here (or scroll down)
-
Pricing and Ordering is available by use of our Online Quotation Calculator where you can experiment with options and create a beautiful handmade decorative grille to suit your style and budget with the option to purchase online.
-
Construction, Fitting and Technical can be found by scrolling down or Clicking Here
|
|
|
|
| Examples of Plating and Treatments applied to the Natural Brass |
|
Square Antique Brass Example
|
|
(Image picture against red background.
Click to enlarge)
|
Full Description:
Interwoven Square Antique Brass Grille, 3mm Wide Plain Brass Wire, 10mm Square, Large Mesh Backing
Product Ref:
GIWS-AB/3P/10A/LM-AB
Notes:
- Made by hand to required size.
- Cannot be cut by customer.
|
Dispatch Timescale:
Currently approx. 6 to 8 weeks. |
|
More Info:
-
General helpful information can be found by Clicking Here (or scroll down)
-
Alternative designs Specifying Table can be found by Clicking Here (or scroll down)
-
Pricing and Ordering is available by use of our Online Quotation Calculator where you can experiment with options and create a beautiful handmade decorative grille to suit your style and budget with the option to purchase online.
-
Construction, Fitting and Technical can be found by scrolling down or Clicking Here
|
|
|
|
Antiqued, Bronze, Nickel and Chrome plating are finishes applied to natural brass at extra expense.
To view more pictures of the plating and treatment finishes available, please visit the lower part of our Regency Brass page.
To specify your own styling for this type of grille, please see the table at the bottom of the page
(These are not stamped woven effect grilles but hand woven. For Woven Effect please Click Here)
|
|
|
Helpful Information:
This is by far our most expensive range of hand made grilles due to the quality of materials and the labour involved in manufacture.
The biggest factor that affects pricing for this product is aperture size. The smaller the aperture, the more material and labour is involved in manufacture. Prices can therefore vary considerably upon this choice.
The second biggest factor that affects pricing for this product is adding a plating or treatment finish to the brass. This will also increase delivery timescales.
Adding a backing mesh increases pricing. Large mesh is a little more expensive than fine when chosen in brass.
You can experiment with these options to see how pricing is affected at our Quotation Calculator
.
|
Interwoven Brass and Stainless Steel Grilles - Specifying
(Any combination of style, metal, width, aperture and mesh can be chosen)
If you cannot see your desired combination above, you can specify your interwoven preference using the following notation:
GRILLE STYLE / METAL WIDTH / APERTURE SIZE / BACKING MESH CHOICE
(See examples above)
|
Choose Grille Style
Select from: |
Choose Metal Width and Style
Select from: |
Choose Aperture Size
Select from: |
Choose Wire Mesh Backing
Select from: |
|
Interwoven Natural Brass Diamond = GIWD
Interwoven Natural Brass Square = GIWS
| Plating and treatments available: |
| Polished Nickel - NK |
Satin Nickel - SNK
(Satin nickel is more dull and greyer than polished nickel. Nickel has a slight golden tinge in certain lights) |
Bronze - BZ
(Bronze is effectively an all black finish.) |
| Polished Chrome - CH |
Satin Chrome - SCH
(Satin chrome is still bright but is not the mirror finish of polished chrome.) |
Antiqued Brass - AB
(Antique brass is a dark brown finish with flecks of natural brass showing through. The backing mesh is an even dark brown when chosen to be the same.) |
Antique Copper - AC
(Antique copper is a dark copper colour with black flecks. The backing mesh is an even black when chosen to be the same.) |
Stainless Steel - SS
(The weave will be woven from a stainless steel wire instead of brass.) |
e.g.
Interwoven Stainless Steel Diamond = GIWD-SS |
|
Plain 3mm = 3P
Plain 5mm = 5P
Reeded 3mm = 3R
Reeded 5mm = 5R
|
10mm = 10A
13mm = 13A
19mm = 19A
25mm = 25A
|
No Mesh = NM
Fine = FM
Large = LM
| Add the following suffix for more options: |
| Stainless Steel |
- SS |
| Chrome |
- CH |
| Satin Chrome |
- SCH |
| Antique Brass |
- AB |
| Bronze |
- BZ |
| Satin Nickel |
-SNK |
| Nickel |
- NK |
e.g.
Fine Stainless Steel Mesh = FM-SS |
|
|
Notes:
Finishes other than natural brass and stainless steel are additional treatments applied to brass. This increases price and delivery time.
|
Notes:
Interwoven natural brass grilles are clear lacquered to maintain their appearance and resist tarnishing unless specifically requested otherwise.
|
Notes:
|
Notes:
Interwoven natural brass backing mesh is clear lacquered to maintain appearance and resist tarnishing unless specifically requested otherwise.
|
|
Additional Information - General Technical, Construction and Fitting:
- Symmetry / Alignment: Interwoven grilles are manufactured symmetrically about the horizontal and vertical centre lines. Same design grilles will therefore pattern match when fitted adjacent to each other along the same centre line (when manufactured on the same order).
- Displayable Sides: This product has only one displayable facing side.
- Sizing: Your decorative grille will be manufactured to the size requested. We do not add any additional amount to fix through at the edges to secure behind your opening. You will need to include this in your required dimensions. (We would recommend approx. 10 to 15mm all around, in a typical application.)
- Size Tolerances: Grilles are manufactured to a tolerance of +/- 2mm per supplied dimension.
PLEASE NOTE that grilles ordered without a backing mesh can concertina slightly before installation. Simply tap the contracted side gently until you have reset the height and width.
- Depth: The depth of this grille at the edge, is approx. 3mm.
- Installation: To install, simply use a small screw and washer though the backing mesh at the rear edge, at approx. 40mm intervals. There is no need to rebate the grille behind the opening unless the rear will be visible and you wish to provide a neater finish. You may however, fit how you wish. No fixings, beading or framing is supplied. Grille edges are left as "raw" cut edges and are not intended for display.
- Construction: Interwoven grilles are hand woven and fixed with solder at the edges to secure the weave. If a backing mesh is chosen, this will be attached by solder to the rear but in some circumstances glued depending on the metals chosen.
Finishes Note: Some finishes are applied by hand and therefore some variation may occur from our images, examples and orders placed at different times.
- Clear Lacquering: All natural brass grilles are sprayed with a fine clear lacquer to resist tarnishing and maintain appearance unless specifically requested otherwise. (This can be noted in the Comments box of our order form)
|
|
|
.gif){kind=small}
